Square rain pipe making machine with bending machine whole line design

Square rain pipe making machine with bending machine whole line design

Square rain pipe making machine with bending machine whole line design can do the pipe bending and pipe rolling forming together. This rolling forming machine is the new design. Compared with the traditional Square rain pipe making machine, it can save working space and easy to operate. The most important is that this Square rain pipe making machine with bending machine whole line design can do the perfect bending effect. In the following part, by pictures and videos we check how it works:

Square rain pipe making machine with bending machine whole line design:

What are the differences of separated machine and whole set type:

1. Elbow pipes could be made at the same time as to the length and bending degree could be set by PLC programme.

2. One woker can do the operation, no need to carry pipes to another place and then do the bending.

3. When you need to produce pipes without bending, simple put the bending head to another place and then Okay. 

4. It can save lots of place for you and save the workers

5. Machine cost will be a little lower than two machines. 

Color Steel Galvanized Downpipe Rain Gutter Square Pipe Roll Forming Machine

Rain gutter down pipe making machine could be used to make downspout pipes in a higher speed with good quality. For this machine, we take guide column frame style to make machine for making sure machine working speed and steady. And for the transmission, we will use double high quality chain. The machine will be totally same as the above pictures shows.

Square rain pipe machine components

1. Passive uncoiler, or you can choose the 3 Ton hydraulic decoiler

2. Guiding unit

3. Roll forming machine, we have chain with middle plate type or the gearbox molding frame type.

4. Cutting unit, we use the hydraulic shearing as it needs to do the bending together.

5. Hydraulic station with the big valves and metal pipe for long time to use

PLC control cabinet, portable touch screen type or cabinet type, you can choose youself.

6. Supporter table manual one or fully automatic type.

7. Security cover of thickness 2.0mm, we do not use the thin one.

8. Elbow machine together with the machine, or you can choose the separated type.

Technical process

Passive uncoil— feeding—Roll forming—Cut to length—bending machine—Output table

Main forming part Specification

Power: 5.5kw

No. of station rollers: 24 rollers and horizontal roller and a series of vertical roll

Forming speed:8-15m/min

Supported material: 0.4-0.8mm color steel sheet or GL, GI and others

Single sided coating: 0.05mm

Hydraulic station power: 5.5kw

Error: ±2mm

Main machine size: 8000 mm×1250 mm×1500 mm

Control style: the high voltage control

The maximum bending camber: 900

Function: combination of bending and lock function

Elbow Bending speed: 5m/ min

Material of shearing: Cr12

PLC computer control: Panasonic 

Square rain pipe making machine with bending machine whole line working video for your reference: